Home » How to Build Deck Footings Without Digging Holes? [Updated 2023]

How to Build Deck Footings Without Digging Holes? [Updated 2023]

It’s a common scenario when building a deck — you need to run pipes, wires and other utilities under the deck. The problem is you can’t dig holes! Digging holes is messy, hard work and requires you to fill them in again. It’s such a pain! Building deck footings without digging holes is a great idea for people who don’t want to put their backs out. It’s also a great way to save money on labor costs, since digging holes is expensive. But is it possible? In this article, we’ll explore How to Build a Deck Footings without Digging Holes!

Exactly, What are Deck Footings?

Deck footings are the foundation of your deck. They’re the part that you put in the ground, usually made of concrete or brick, and they hold up all the weight of your deck. The concrete has to be poured right and leveled off so that it’s perfect, or else your deck will be crooked! Deck footings are usually put in by a professional but if you have some experience with concrete and construction you could probably do it yourself if you wanted to. Deck footings are different from house footings because they’re not as big or deep—they’re just there to support the weight of your deck so it doesn’t fall over or crack!

Different Ways to Build Deck Footings without Digging Holes?

When you’re building a deck, you’ll need to make sure that it’s properly supported by footings. But what if the ground is uneven or too rocky to dig into? Well, don’t worry—there are plenty of options that don’t require digging!

Here are some ways to  build deck footings  without digging:

  • Floating deck footings
  • Deck footings no concrete
  • Free-standing deck footings
  • Ground-level deck footing options

1. Floating Deck Footings

If you want to build a floating deck, you need to make sure that the grass and soil underneath won’t be damaged by moisture. If there’s already a concrete slab under the area where you want to put your deck, then there’s no problem! But if not, then you may need to install a waterproof membrane first before putting down your plywood boards.

2. Deck Footings No Concrete

Deck Footings No Concrete - VIPLEAGUE1

If you don’t have access to ground level but still want to build a deck without digging into the earth, then installing free-standing footings is an option for you! These are essential pillars that support an elevated platform for your decking materials—they’re basically invisible from above ground level since they’re hidden by whatever landscaping features surround them (e.g., trees or shrubs).

3. Ground Level Deck Footing Options

There are several options available if you’re just looking for a way to level out your yard before building a deck. The simplest option is to use concrete blocks attached together with a mortar and stacked on top of one another until they reach the desired height.

Another option is to use interlocking pavers which can be purchased from hardware stores or online retailers like Amazon. These pavers offer more variety in color and style than concrete blocks do so they may be more appealing for those who want their patio area looking more like an outdoor living room than simply a place where people walk around barefoot when it rains outside!

Explore Our Others Home Repairing Articles:

4. Free Standing Deck Footings

A free-standing deck footing is exactly what it sounds like: a footing that’s built on top of the ground, instead of in it. It can be made from wood, stone, or even reinforced concrete. The only difference between this type of footing and one built below ground level is that it’s not buried in the dirt. The rest of the steps for building a free-standing deck will be exactly the same as for one that does require digging.


In the end, we would venture to say that the answer is that it really depends. If you know that you’re not going to be digging any footings in the yard, then save yourself some time and hassle to build deck footings without digging. However, if your situation isn’t clear cut, or even if you want a little bit of extra insurance, simply going the route of building a post hole might just ease your mind. For more information on decking, you can read about can you paint Trex decking and composite decking to create a masterpiece of your own choice.


How to Build a Small Deck Platform?

How to Build a Small Deck Platform
How to Build a Small Deck Platform

Building a small deck platform can be a great way to enhance your outdoor space and provide a comfortable area to relax and enjoy the outdoors. Here is a step-by-step guide on how to build a small deck platform:

Materials and Tools You Needed for Building small deck platform.

  • Pressure-treated lumber (2x4s, 2x6s, and 4x4s)
  • Decking boards
  • Concrete blocks
  • Gravel
  • Deck screws
  • Drill
  • Circular saw
  • Level
  • Measuring tape
  • Pencil
  • Safety glasses
  • Work gloves

Step 1: Plan and Measure

Before you start building your deck platform, you need to plan and measure the area where you want to build it. Consider the size, shape, and orientation of your deck. Determine how high you want the deck to be and where you want the stairs to be located. Measure the length and width of the area where you want to build your deck.

Step 2: Prepare the Site

Clear the area of any plants, rocks, or other debris. Level the ground with a rake and a shovel.

Step 3: Lay the Foundation

The foundation of your deck platform will consist of concrete blocks and gravel. Place the concrete blocks at each corner of your deck platform. Add a layer of gravel inside each block to create a stable base. Use a level to ensure that the blocks are level and adjust them as necessary.

Step 4: Install the Support Posts

Cut 4x4s to the desired height for the deck platform. Place them on top of the concrete blocks. Use a level to make sure they are plumb, and then secure them to the blocks with deck screws.

Step 5: Install the Frame

Cut 2x6s to fit around the perimeter of the deck platform. Attach them to the top of the support posts with deck screws. Cut additional 2x6s to create joists spaced 16 inches apart. Attach them to the frame with deck screws.

Step 6: Install the Decking Boards

Lay the decking boards perpendicular to the joists. Start at one end of the deck platform and work your way to the other end. Leave a small gap between each board to allow expansion. Secure each board to the joists with deck screws.

Step 7: Install the Stairs

If you want stairs leading up to your deck platform, cut stringers from 2x12s. Attach them to the frame with deck screws. Cut treads from decking boards and attach them to the stringers with deck screws.

Step 8: Finish the Deck

Add any finishing touches you desire, such as railings or a coat of stain or paint. Then, sit back and enjoy your newly built deck platform!

It’s important to note that building codes and regulations may vary depending on your location, so be sure to check with your local government before starting your project. Also, if you’re not comfortable doing the work yourself, consider hiring a professional Deck Builder or local nearby handyman to ensure that your deck is safe and properly built.

Tips to Build A Deck Without Concrete?

Building a deck without concrete can be a great option if you want to avoid the expense and hassle of pouring a concrete foundation.

Here are some tips on how to build a deck without concrete:

  1. Choose the Right Location
  2. Use Ground Contact Pressure-Treated Lumber
  3. Use Gravel for the Foundation
  4. Build the Frame
  5. Install the Decking
  6. Install Railings
  7. Finish the Deck

Building deck Footings without concrete is a great way to save time and money while still creating a beautiful and functional outdoor living area. With the right materials and techniques, you can build a durable and long-lasting deck that will provide years of enjoyment.

How to use Concrete Deck Blocks for Posts?

Concrete deck blocks can be a great option for supporting posts for a deck, as they are easy to use and can be installed without digging holes or pouring concrete footings.

Steps to follow for  how to use concrete deck blocks for posts:

  1. Determine the Placement of the Deck Blocks
  2. Clear the Area and Level the Ground
  3. Install the Deck Blocks
  4. Add Gravel and Compact
  5. Install the Post Anchors
  6. Insert the Posts and Secure
  7. Build the Deck

Using concrete deck blocks for posts can be a simple and cost-effective way to build a deck without the hassle of digging holes or pouring concrete footings. With the right materials and techniques, you can build a sturdy and durable deck that will provide years of enjoyment.

Can I Use Deck Pier Blocks Instead of Footings?

Yes, you can use deck pier blocks instead of footings for your deck. Deck pier blocks are a type of precast concrete block that is designed to support the weight of a deck post. They are commonly used as an alternative to traditional concrete footings, as they are easier to install and require less digging and concrete pouring.

Things to keep in mind if you are considering using deck pier blocks for your deck:

  • Check Local Building Codes
  • Use the Appropriate Size and Type of Pier Blocks
  • Ensure Proper Spacing and Placement
  • Level the Blocks
  • Install the Posts and Build the Deck

In summary, deck pier blocks can be a viable alternative to traditional footings when building a deck. However, it is important to select the appropriate size and type of blocks, properly space and place them, ensure that they are level, and follow all local building codes and regulations. With the right materials and techniques, you can build a sturdy and long-lasting deck using pier blocks.

Don’t Forget to  Explore Our Other Painting Articles:


Hey Readers, I am Co-Founder & Digital Marketing Expert. I love to express my ideas through my own writing. I love to get engaged with readers who are seeking informative content on various niches like Home Improvement, Food, Celebrity Net Worth, Technology, Electronics, Fashion, Lifestyle, NFT, Crypto Content.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top